Skip to content

A Look Into The Presidential Limousine

Limo One, arguably the worlds safest presidential limo, is no James Bond sci-fi fantasy. While its specs are not disclosed for security reasons, what can be said is how its got a pretty great deal of armor, equipment and prestige.

With Luxury Road Events, you get a little taste of how it is being driven around like the President of the United States. Their party buses may not be as armored as the presidential limo or equipped with the same gadgets, but they can provide complete safety and convenience for you, your family members and friends. Clients are treated with an unquestionable VIP service to events such as business meetings, corporate functions, formal events, wine tastings, brewery tours and more. It doesnt matter whether the need is for one person or a large group of guests. All requests can be accommodated.

American cars have been selected throughout history to transport the most important individual in the United States. A variety of them have been commissioned since the late 1930s, as implemented by the Federal Government. As for the current heavily armored vehicle, referred to by the Secret Service as The Beast, we know that it commenced service on January 20, 2009 in time for newly elected President Obama. General Motors handled the manufacturing, and its design was based on the previous limo during President Bushs time, the Cadillac DTS. Unlike its predecessor, however, this one doesnt carry a specific model name.

If you put a vehicle of standard production and The Beast side by side, theyre practically from two different planets. With regard to looks, its outward appearance does share a lot of current Cadillac styling themes, but its body displays a greatly modified version of the recent DTS-badged presidential cars. Its door handles, side mirrors and headlights all seem to have been sourced from the Escalade model, whereas its backup lights and taillights seem taken from the STS sedan.

A maximum of seven people can fit comfortably in Limo One, and at least three passengers are aboard at all times: Mr. President, the driver and the lead Secret Service protective agent. In the back, there are four additional seats, with one spot next to Mr. President and the other three being rearward-facing spots. The driver has to be a top selection, one whos undergone extensive training and can perform police-style maneuvers in the case of evading attacks.

The extent of protection on The Beast seems to be no joke. Its doors allegedly weigh the same as those of an aircraft like the Boeing 757, while the five-inch thick bulletproof windows are believed to comprise at least five layers. Regarding other rumored details, the armor plating has a thickness of eight inches and the vehicle, as a whole, weighs a total of 20,000 lbs.!

Regarding on-board equipment, youd be surprised if you thought those tools flaunted in action films couldnt all be in one ride in real life. The Beasts trunk comes fully prepared for any extremes with shotguns, oxygen tanks, firefighting equipment, tear gas canisters, grenade launchers (only speculated) and even a cache of blood type that matches the presidents! Indeed, this limo isnt just some royal carriage. Its ready to do everything it can to guard the most powerful man in the U.S., if not the free world.

Are You Up For Buying A Used Tiguan For Sale In Kent?

What are some of the used cars you've purchased in the past? The last used car I bought was a Mazda 626, and right before that, it was a Nissan Maxima. I was told that foreign cars are sometimes better to buy used, but everyone has their own preferences. What do you think about Volkswagen? The Volkswagen Tiguan is a popular used vehicle. Have you searched to see if there is a used Tiguan for sale in Kent ?

If you're not familiar with the Tiguan, you need to take a look at the type of vehicle it is and if it would work for you and your family. This is a nice luxury vehicle if you ask me, but the only thing is new ones cost around 40 grand. That's right, so if you don't want to pay almost 40,000 'smackerooos' for a new vehicle, then you might want to see if you can find a used Tiguan in Kent.

If a vehicle costs that much brand new, you can bet that it's supposed to perform well for quite some time. You should be able to count on a used Tiguan for many years, and hopefully you can find one with low mileage. Are you wanting to buy one that is just a year or two old, or are you wanting to try and find one that is a few years older. I'm not certain what year they started making Tiguans. For example, if you wanted a five year old used vehicle, the Tiguan might not have been around then.

The 40,000 listing price for a new Volkswagen Tiguan was for a vehicle with all the upgrades of course. They do have new listings for these vehicles as low as 27,000. With new prices fluctuating like that between different models, you can bet it's going to pay off to look at the used prices closely as well. For example, I found one 2013 used Tiguan that is on sale for 26,000. That is a used Tiguan, but you can buy a new one for that price if you add 1,000 to the mix.



Of course, that 2013 Tiguan is probably one of the more luxurious models. I think that any of these vehicles used should be under 20,000. I'm looking at the listings just right quick on one site to see what I can find. First of all, I see Tiguans at this dealership going back as far as 2012. Now, these are certified pre-owned vehicles, and that is what you want to make sure you get your hands on by the way. Moreover, I'm starting to see listings in the 19,000 range.

As a matter of fact, I now see one used Tiguan from 2009 that is selling in the 12,000 range. There is also one from 2010 that is selling for under 11,000 dollars. So there you have it, you can buy a used Volkswagen Tiguan in Kent for anywhere from 11,000 on up to 27,000. It pays to look around!

Latest Hovercraft Materials

Like all vehicles, small hovercraft constructions can be separated into distinct categories, with sole aspects of them relating to two or more of these categories. Let's call them hull construction, skirt, engines, controls and fitments, just like any other mode of transport. Of course, the overall design scheme is to integrate these distinct systems into one whole unit that performs in the required manner - it must float and move forward carrying passengers in safety, easy to control and be economical to buy and run - a tall order!

How much is a personall hovercarft? Hovercraft prices have come down significantly because of constant development in each category and new ideas are appearing all the time. A major step forward occurred with the invention of new composite expanded plastic materials that enabled designers to incorporate new techniques to hull design. Traditionally, small ACV craft were built on glass fiver hulls, which were light and strong, but didn't react too well to shocks and bangs. Basically, they tend to split and are very difficult to repair properly. New plastic materials don't surrender their unit strength when one part of it is impacted by a rock, for example.



The skirt is another major design component and is the subject of much improvements at the present time. In the past, the skirt was fabricated with just one piece of material, and then fastened securely around the perimeter of the craft hull. The material used was often rubber based with interlacing cross layers of material. In other cases, rip-stop fabric was used similar to the sail cloth used on large sailing boats. One big drawback of using a one-piece design is that if the skirt is damaged, then it has to change out completely.

The latest skirt design have revolutionized the cost of damage by splitting it up into small sections. One company is using a for of Kevlar for this, which is extremely tough and durable. However, anything can get damaged in the right conditions. This company fastens the sections to the hull securely, but they are only fastened to it's neighboring section using cheap nylon tie-wraps. If one section is snagged, it simply breaks the tie-wraps. If it is damaged, then it's easily replaced by another section that can be carried in the spares cupboard. Modern small hovercraft hulls have a molded compartment to house the engines, either one or two, and a lid minimizes the noise while allowing maintenance access.

The Importance Of Motorcycle Lessons

Motorcycle riding is definitely an enjoyable activity - not only for guys but even for the ladies as well. However, for new riders, there's always the risk that they're not entirely familiar with the laws and regulations concerning motorcycle riding. This is where motorbike lessons become important -it teaches beginners the things they need to know before going on the highway.

Unlike drivers, riders usually face a lot of road challenges-- this includes less stability from two wheels, reduced protection from external forces, and reduced visibility. For these reasons, it's crucial for motorcycle riders to take motorcycle lessons that could help them prepare for these challenges.

How It Benefits New Riders

Just like what has been mentioned earlier, new riders are encouraged to take motorcycle lessons, because it's one of the best ways on how they'd learn to ride properly. There are motorcycle courses specifically designed for beginners, and these classes teach the basics of operating a motorcycle and everything in general that new riders would find very useful. Motorcycle training is usually composed of 2-3 sessions, and this includes 5 hours of classroom instruction, as well as activities and 10 hours of on-bike riding experiences.

Some of the things the basic riding course offers are the following:

  • Appropriate motorcycle gear.
  • How to perform an inspection before riding the bike.
  • The proper way of starting and stopping the bike.
  • The best ways to maneuver through obstacles and traffic.

In some states, by simply completing this basic course allows you to obtain a license.

ATGATT

If you're a rider, you probably heard the term, all the gear all the time. These six important words are what novices should learn by heart. It's also one of the things discussed in motorcycle classes.

Finding the Best Schools

The best motorcycle schools offer qualified motorcycle instructors throughout the whole duration of the course. Trainees are provided with helmets, together with communication gadgets attached to them. Aside from that, a reliable motorcycle training school also offers courses that follow the government regulations, and only government-certified programs should be taken into consideration by those who want to undergo training.

Lowering Insurance Rates with the Help of a Motorcycle Safety Course

Considering the fact that those who have completed the safety course would be less prone to accidents, most insurance companies are willing to offer discounts to these riders. In most cases, the discounts can be very significant, and so, it would really be practical to undergo motorcycle training. For more information about motorcycel lessons visit biketrainingwa.com/services/



The Marine Battery And It's Different Configurations Explained

Choosing the right battery for your boat can be very confusing, especially if most of your experience is involving cars. There are also a lot of helpful people that will give you wrong information about batteries, it's not their fault, this is a long-standing problem even among some battery sales people. Let's examine the difference between the regular marine battery, the deep cycle battery for marine use, and the AGM marine type battery now.

Automotive Batteries Will Start Your Engines Fine

The problem with using a car battery in your boat is that they're constructed differently inside. Boats tend to slam into the waves hundreds of times per hour and a car battery isn't made to take the hits.

If you were to open up the two types of batteries you would immediately see that the lead plates are laid out differently in each of them. The marine battery is built to take a constant pounding at wildly different angles as the boat goes vertical one minute and horizontal the next.

You'll also see that there are spacers and supports separating the plates in the marine style battery that helps keep them apart. Once they touch, that part of the cell is shorted out and dead. A car battery won't have the spacers or the extra support because it doesn't need them.

A Deep Cycle Marine Battery Is Different As Well

A deep cycle battery is made to run appliances like refrigerators, radios, and microwaves or run electric trolling motors. These uses draw low amounts of power over long periods of time. If you run a deep cycle battery all the way down, it will still take a charge and not be ruined like a regular battery would.

The difference between the "marine" deep cycle and a regular deep cycle is again, the supports for the plates inside so it can take the beating of being on the water and pounding the waves. Other deep cycle batteries are used in solar applications, golf carts and computer backup UPS devices.

An AGM Battery Is Built To Take Up Side Down Use

AGM stands for "absorption glass mat" and that's because there are mats, similar to fiberglass, built into the battery between the lead plates. These batteries are slightly more powerful that regular batteries and can also handle being completely turned upside down during usage without spilling or harming the battery.

These batteries are especially good when used in applications where the vehicle will be in many different positions, like boats, ATV's, 4 wheel drives, and airplanes. The military is especially fond of then because many military uses involve off-road driving and they need a dependable battery at all times. Regular batteries are prone to leaking and the battery acid is especially bad for electronic components that could be ruined by just one spill.

Now that you can see the differences between the different batteries you can understand why people get so confused. When you go into the battery store it's important to explain the exact uses that the battery will be used for in order to get the right one for your application.



#TheMarineBatteryAndItsDifferentConfigurationsExplained

From Passenger Craft To Leisure Toy - The Hovercraft Comes Of Age

It was a long time dream of mankind, to move through the air like a bird without a care in the world. Orville and Wilbur Wright are accredited with the first sustained flight in a controlled vehicle that was heavier than air and the rest, as they say, is aviation history. Since those exciting times, incredible engines of flight have been developed, both for war and for peace, with the ability to travel at amazing speeds. Relatively recently in our history, we have such wealth and leisure time that some of us use flight as a hobby and an enjoyable way to spend recreation time.

Although aeroplanes are still quiet expensive, even for a small one, there is one outdoor activity that is interesting both marine and on-shore enthusiasts. Hovercrafts are not that new. After first being invented in the UK in the 40s, it seems that designs existed decades before. It's just that the technology and engines didn't exist in those times. Air cushioned vehicles (ACV), as they are sometimes called can't really be called an airplane, because it doesn't raise high enough from the ground, but it doesn't actually touch the ground either.

Full sized and small hovercrafts float on a cushion of air pressure which is generated by a propeller mounted vertically underneath an engine. Downward thrust is assured by a skirt which contains the air pressure until it slowly leaks away underneath the hovercraft. The same principle powers all crafts, even the personal hovercrafts used for leisure purposes. In smaller versions, one engine provides vertical and forward thrust by re-directing air flow downwards and backwards.

All sizes of these vehicles are steered by pivoting hinged flaps behind the rear air flow, and so pushing the rear of the craft either left or right. Hovercraft used for sport racing must be very light and are mostly made from glass fiber, with various other types of flexible material used for the skirt fixed around the hull. One problem with the skirt is that it can become damaged by trailing over sharp rocks or other obstructions. Although a hovercraft will float several inches above flat ground, it will not raise up over a relatively small obstacle in it's path.

In recent years manufacturers have employed new materials, causing hovercraft prices to come down a lot, just because so many younger people are looking to buy a personal hovercraft for leisure and fun. Some vehicles now have very robust hulls, which don't split easily, using high density plastics instead of glass fiber. Skirt material is also much tougher - it can't be ripped easily when pulled, and the whole skirt arrangement is made up of smaller sections held lightly together, so that if a section is damaged it can simply be replace very cheaply.

Choosing Between A Manual Car And An Auto Car.



You may be planning to buy a car and you're spoilt for choice on whether to buy a manual or an auto car. You have probably talked about it with your friends and family and some of them are advising you to go for a manual car while others are telling you that an auto will be the best buy. Well, you need not worry. It is easy to make up your mind on whether to buy a manual or an auto once you know what exactly what you are looking for in a car and what each kind of car entails.

Before we can go into the kind of car to choose between a manual and an auto, lets first look at what each car entails. We will look at the features that set one car apart from the other one and also each car's pros and cons. Lets start with a manual car. A manual car is the car that has been in existence for the longest period of time between the two cars. Cars before the millenium years were mainly manual cars. Manual cars are still in the market even after auto cars have been massively introduced into the car market over the recent years. Manual cars contain a stick gear and a clutch that is operated by the driver of the car. The gear stick is movable and one can select gears.

A manual car has a number of pros. To start with, it economises fuel. Tests which have been carried out by ConsumerReports.org have shown that a manual car can improve gas mileage by upto 2-5 mpg. Manual cars don't have a torque converter, a device that causes more fuel to be burnt when a car is in transmission. Secondly, a manual car is easy to maintain. Manual cars contain less complex features and therefore they rarely undergo internal damages or have parts needing repair. The only part of a manual car that may require repair is the clutch but this part is able to go for many years without needing repair or replacement. Thirdly, the transmission fluid used in a manual car doesn't need frequent changing. The fluids used in a manual car are engine and gear oils and these rarely need to be changed as they don't deteriorate easily. Fourthly, a manual car gives one a better control of the vehicle as it is easier to brake. Also, a manual car is cheaper in price and therefore affordable.

Coming to the cons, learning to drive a manual car may be difficult. One may have trouble operating the stick shift. Also, one may have trouble pulling away from a hill and may even roll back into traffic. Depressing a heavy clutch pedal can also cause leg and joints pains especially to inexperienced drivers.

Concerning an auto car, auto cars are cars which are self-shifting. The cars can automatically shift gears without the driver having to use stick shifts.

An auto car has a number of pros. The first of these is that it is easier to drive an auto car. In driving an auto car, all one has to do so is to press buttons alongside using the steering wheel. This is unlike in the case of a manual car where one has to operate the clutch pedal with their foot. An auto car also has the advantage of speed and it is also easier to drive in hilly places as well as in heavy traffic because decelerating it is easier compared to decelerating a manual car. An auto car is also less likely to stall.

Coming to the cons, an auto car first of all consumes more fuel. Auto cars are fitted with a torque converter and this usually leads to the burning of additional fuel when the vehicle is in transit. Secondly, the transmission fluid in auto cars frequently need changing. Lastly, an auto car is more expensive to purchase compared to a manual car.

Having looked at what each car entails, we can now go into the issue of making a choice between an auto car and a manual car. Concerning whether to choose an auto or a manual, it should mainly depend on what you are looking for. If you are for example looking for a vehicle that will make you spend less in fuel then a manual is what you should go for. However, if you are looking for a vehicle that will give you an advantage in heavy traffic or allow you to drive with relative ease then an auto is for you. You can learn to drive in both types of car when you learn to drive in Glasgow with the Glasgow City Driving School.

Why Trucking Companies Need A Fleet Vehicle Tracking System



The trucking industry and delivery industry is a multi billion dollar giant. The problem is their is quite a bit of loss in the industry as well from the wrong trucks being dispatched to runs and the dispatcher providing people with the wrong routes. This is when people may want to know more about why their vehicles need a fleet tracking system. Once people know about this, it is going to be easy for people to know if the vehicles are going to be dispatched with the right vehicle being sent to the right location or not.

Cost savings is a major sticking point for a lot of companies. The companies will generally want to know the cheapest way possible to move the vehicles around and often when the drivers are relying on their own skill they can find the route to get where they need to be, but it may not be the fastest route. With that being said, people need to realize these tracking systems can start to route the vehicles around to the areas that are going to benefit them the most and allow them to get to the area they need to be at.

Dispatching issues will be resolved is going to be one of the other things that people are going to enjoy. While most of the time people never think about this, they need to realize their are going to be problems with the vehicles being dispatched improperly because their were closer vehicles or their were other vehicles that can handle the job. So this is going to be a great step in the right direction in the time savings on the driver and even the company because they will have a lower amount of waste being done because they will finally be able to get the proper drivers to the right area.

When people are looking at their trucking company they may not realize their are a variety of ways for them to save quite a bit of money. The problem is so many companies miss out on these opportunities that it is not funny. This is when people should know more about why they should be using a fleet tracking system. By knowing more about why they should be using these systems it is going to be easy for them to save quite a bit of money and make better business deals because of the savings.